A hot tub in your home can be a great way of relaxing your mind and body after a long day of hard work. Hot tubs along with the best hot tub chemicals are also a great way of spending time with family and friends. Even though hot tubs provide us with hours of fun and relaxation, sometimes issues arise. It is stressful to diagnose the problem and find the solution.

Here, we will discuss the ten most common problems and the solutions to those problems that people with a hot tub experience.

1. Cloudy Water:

Dirty hot tub filters, excess oils, incorrect sanitiser, overused or very old water can cause the water in the hot tub to be cloudy.

Solution:

Clean the hot tub filters, add sanitiser, shock, and any other necessary hot tub spa chemicals to the water, adjust the pH and the alkalinity levels of the hot tub water. Run the jet pumps and clean the filters. Drain the water, clean, and refill the hot tub.

2. Water odour:

Improper sanitisation, low pH level and excessive organics in the water can cause odour.

Solution:

Add sanitiser and shock to the water, adjust the pH level up to the recommended range, drain the hot tub water, clean, and refill the hot tub.

3. Chlorine odour:

High chloramine level and low pH can cause chlorine odour in the water.

Solution:

Adding a shock spa with the sanitiser and adjusting the pH level will fix the issue.

4. Musty odour:

The growth of bacteria or algae in the hot tub water is the probable cause of musty odour in the hot tub.

Solution:

Adding shock with sanitiser to the water might clean up the odour. If the issue remains persistent or visible, then drain, clean, and refill the hot tub.

5. Scum ring or organic build-up around the tub:

The probable cause of this is the build-up of dirt and organic oils around the hot tub.

Solution:

Wipe off the build-up around the tub with a rag. If the problem is too severe, drain the water, scrub the shell of the hot tub to get rid of the scum and refill the hot tub with water.

 6. Algae growth:

High pH levels and low levels of sanitisers cause algae and other contaminants to grow in the hot tub water.

Solution:

Adjust the pH and alkalinity levels of the water in the hot tub to the recommended range. Add shock with sanitiser and maintain the sanitiser levels in the water.

7. Irritation to the eye:

Low pH levels and low sanitiser levels cause irritation to the eyes when you soak in the hot tub water.

Solution:

Maintain the sanitiser levels and add all the necessary hot tub spa chemicals to maintain the chemistry of the water.

8. Skin Irritation:

Unsanitary or overused water and free chlorine level over five ppm can cause irritation or rash to the skin.

Solution:

Allow the free chlorine level to drop to below five ppm before you soak in the hot tub water and maintain the sanitiser levels in the water.

9. Hot tub stains:

Too low pH levels or too low alkalinity levels and a high amount of copper or iron in the water of the hot tub causes the hot tub to stain.

Solution:

Adjust the levels of total alkalinity and pH in the water. Use a chemical cleaner to scrub off the stains.

10. Scale:

Too high pH levels or too high alkalinity levels in the water and high calcium content in the hot tub water can cause scale on the hot tub. 

Solution:

Adjust the water chemistry levels by adding the hot tub spa chemicals that are necessary. If the scale needs to be removed, drain the water, use chemical cleaners to scrub off the scale, clean the shell of the hot tub, and refill the tub with water.

Final Thoughts:

All the problems listed above are the most common problems that almost every hot tub owner experiences. Hot tub owners can prevent these problems by maintaining the chemistry levels of the water in the hot and by cleaning the hot tub regularly.

As we have witnessed in the solutions, these problems can be fixed very easily by using proper amounts of hot tub spa chemicals. You can buy hot tub chemicals online or from us. Hot Picks are delivering all over the UK and have one of the best collections of hot tub chemicals online.