Polyurethane HD IsoFree Aliphatic 2K Floor Coating | High Gloss Satin Matte Flat | Low Temp 40 °F | ...

OverviewSpecsCoverage RateCure TimeChemicalApplicationMore Options Polyurethane HD Aliphatic Polyurethane 2K Floor Coating | Low Temp 40 °F | Non-Yellowing RainguardPro® Polyurethane HD Aliphatic Poly Urethane 2K is a two-component, high performance, zero-VOC, odorless, water-based, aliphatic polyurethane paint/coating. Polyurethane HD provides years of excellent protection against harsh weather conditions, UV exposure, corrosion, physical damage, and has elastomeric properties. Polyurethane HD acts as a breatheable elastomeric waterproofer and can be applied in low temperature conditions down to  40 °F. This product may be sprayed, brushed, or roller applied. Polyurethane HD is unique in that it has no VOC’s due to its total water-based formulation. When fully cured, this product has good chemical acid resistance, UV protection, excellent water resistance, abrasion resistance, flexibility, and is totally environmentally safe. Polyurethane HD Aliphatic Polyurethane is a two component product that has a 3:1 mix ration (by volume 3 Parts A to 1 Part B) and is packaged in 32 oz, 1 gallon and 4 gallon kits.  It has a long 1.5 to 2.0 hour POT life at 75°F (24° C) and less than 65% humidity.  POT life/working times will start to be reduced as humidity increases to 65% and at/above 80% there will be a very noticeable and significant reduction.  Increases in temperature above 75°F will have a similar effect.  As temperatures drop below 75°F, cure times will increase the time required to wait between coats. It is available with 4 gloss level options; super matte (nearly flat), matte, satin and high gloss finish and in a non-yellowing clear or in a pre-tinted white.   Polyurethane HD has IsoFree Technology So when Part B Is mixed With Part A, The crosslink reaction makes the combined product free of any isocyanates.  Thereby the product is safe to apply for both the applicator and the environment with zero voc’s. It is also available in 3 tint bases: White (can be used as a Pastel Base), Accent and Deep. What comes in a kit? Part A Part B Kit Makes*: 24 Fl. Oz. 8 Fl. Oz. 1 Quart 96 Fl. Oz. 32 Fl. Oz. 1 Gallon 384 Fl. Oz. 128 Fl. Oz. 4 Gallons After mixing the components, may be reduced with water. Typical spray applications require a 5% to 10% reduction. Do not exceed 15% Tinting Instructions Clear DO NOT TINT White (can be used as a Pastel Tint Base) Up to 4oz of Colorant per Gallon Accent Tint Base Up to 11oz of Colorant per Gallon Deep Tint Base Up to 8oz of colorant per Gallon Where is Polyurethane HD Aliphatic Urethane used? Warehouses Tile Floors and Walls (Glazed and Unglazed) Food and Beverage Facilities USDA Inspected Facilities* Commercial Vehicles Airports Stadiums Sound Walls Direct-To-Metal (Must use primer first) Warehouse Floors Garage Floors Why Polyurethane HD Coating? Scratch Resistant Great Chemical and acid resistance MEK Double rub @50% solids Passed 2,000 Cycles Test Non-yellowing & UV resistant topcoat Apply Direct-to-metal* and concrete Excellent as a protective floor coating, or topcoat applied over a primer epoxy, as a high-gloss, chemical/acid resistant topcoat for industrial concrete flooring applications Breatheable elastomeric waterproofer Zero VOC- SCAQMD Compliant Choice of High Gloss, Satin, Matte or Super Matte (nearly flat) Finish Comes in Clear or White Color Excellent Adhesion Use on wide range of surfaces including Concrete, Block, Brick, Wood, Painted Metal, Tile (glazed & unglazed) *Do not use on bare ferrous metal. Only apply to ferrous metal that is properly prepped and primed to receive a water based coating. SPECIFICATIONS Solids by Weight Clear 60% ( /-2%) Pigmented 66% ( /-2%) Solids by Volume 50% VOC 0 g/L (mixed) Colors Clear and white Recommended Film Thickness  3-4 mils wet, 1.5-2 mils dry (Do not apply over 5 mils wet) Coverage per Gallon 250 – 400 sq’/gal @3-4 mils wet thickness Packaging 32 oz kit, 1 gallon kit, 4 gallon kit Mix Ratio 2.25:1 mix ratio by volume Shelf Life 1 year in unopened container Finish High gloss (>90 at 60 degrees @glossmeter) Gloss Loss <10% ASTM D523 Color Loss <1.1% ASTM D2244 Humidity 1500 hours ASTM D2244 Salt Spray 1500 hours ASTM B117 Abrasion Resistance < 40 mg ASTM D4060 MEK Double rub @50% solids Passed 2,000 cycles Flexibility Pass ASTM 2794 Adhesion Pass ASTM D2197 Odor None  Hardness > 2H COVERAGE RATE Substrates Sq Ft/Gallon Textured Surfaces Approx. 250 – 300 All Masonry Surfaces Approx. 300 Painted Surfaces Approx. 400 Wood Surfaces Approx. 300 Metal Approx. 400 Tile Approx. 350 CURE SCHEDULE Pot Life to 1.5 hour Tack Free (dry to touch) 4 hours Recoat 4 – 8 hours Full Cure 3 – 7 days Temperature and humidity directly affect pot life and dry time. Conditions should be between 40 – 95 °F (5 – 35 °C) and humidity should not exceed 80%. CHEMICAL RESISTANCE RainguardPro® Polyurethane HD provides excellent resistance to a wide range of chemicals and acids, including:  Ammonium hydroxide  Potassium hydroxide  Sodium hydroxide Sodium chloride Trisodium phosphate Ethyl Alcohol Isopropyl alcohol Methyl alcohol Hyjet #3 Skydrol 500 A & B Hydrochloric acid 10% Phosporic acid 35% Sulfuric acid 20% Acetic acid 24% Trichlorethylene Perchlorethylene Toluene & Xylene Jet fuel – Butyl cellusolve Acetone – Cellusolve acetate MEK (Methyl ethyl ketone) Beer – cola – milk Mustard – bleach MIXING AND APPLICATION INSTRUCTIONS PRODUCT STORAGE: The recommended storage temperature is approximately 22 °C (72 °F). Do not damage containers. Store in a dry place. Do not store for extended periods in direct sunlight. Protect containers from resin and moisture contamination. SURFACE PREPARATION: Make sure all contamination such as dirt, oil, grease etc has been removed from surface that might impact adhesion.  Recommend for proper adhesion on bare concrete surfaces floor is roughed up, either a light mechanical grind or blast is preferred or an acid etch. For an acid etch preparation we suggest our E760CE Muriatic Replacement as a safer alternative. PRODUCT MIXING: Stir Part A for 2 minutes with Jiffy Mixer type drill mixer at slow speed (500 rpm) to fully disperse the product To Catalyze product (get it ready to use) pour Part B into Part A slowly and mix for 2-3 minutes Pour a portion of mixed Part A and B back into Part B can until full and mix well for 30 seconds, then pour back into the mixed Part A and B can. Allow product to stand for 5 minutes before applying.  Loosely cover mixed product  DO NOT RESEAL MIXED PRODUCT! Product may be reduced with clean water to achieve desired viscosity.  We recommend using distilled water Typical spray applications require a 5% to 10% reduction with water.  Do NOT exceed 15%. Do NOT reduce catalyzed product after 30 minutes IMPORTANT:  Mark time to establish pot life from when you start mixing A and B.  Pot life to 1.5 hours. Do NOT mix with other products or other containers of RainguardPro Polyurethane HD Tinting Instructions Clear DO NOT TINT White (can be used as a Pastel Tint Base) Up to 4oz of Colorant per Gallon Accent Tint Base Up to 11oz of Colorant per Gallon Deep Tint Base Up to 8oz of colorant per Gallon Improper mixing may result in product failure. For best mixing results and proper blending of parts A and B, recommend a Jiffy Mixer style drill mixer. REDUCTION (OPTIONAL)  REDUCTION // CLEAR Pour the contents of Part B into Part A. After mixing the components well (as described below) for approximately two (2) minutes, it may be reduced with water up to twenty percent (15%). Typical spray applications require a 5% to 10% reduction. Do not exceed 15%. REDUCTION // WHITE Pour the contents of Part B into Part A. After mixing the components well (as described below) for approximately two (2) minutes, Use of an improper drill mixer can result in curing problems if the hardener also called activator (Part B) is not thoroughly blended with the resin (Part A) which can cause some areas on your floor to remain soft and not harden properly.  DO NOT USE A PAINT MIXER.  Most mixing problems described above can be traced back to using a paint mixer..  DO NOT HAND MIX as this approach can result in the same problems as using a paint mixer. What comes in a kit? Part A Part B Kit Makes*: 24 Fl. Oz. 8 Fl. Oz. 1 Quart 96 Fl. Oz. 32 Fl. Oz. 1 Gallon 384 Fl. Oz. 128 Fl. Oz. 4 Gallons *See instructions for dilution percentages PRODUCT APPLICATION: IMPORTANT: Proper methods to protect from over spraying should be implemented. Atomized particles will adhere to most surfaces and are extremely difficult to remove.  Temperature and humidity directly affect pot life and dry time. Conditions should be between 40 – 95 °F (5 – 35 °C) and humidity should not exceed 80%.  Can apply using brush, roller or sprayer. POT life/working times will start to be reduced as humidity increases to 65% and at/above 80% there will be a very noticeable and significant reduction.  Increases in temperature above 75°F will have a similar effect.  As temperatures drop below 75°F, cure times will increase the time required to wait between coats. Smooth Surfaces RainguardPro® Polyurethane HD may be applied directly over most surfaces without primer. Apply a light coat at a thickness of 3 to 4 wet mils. Do not exceed 5 mils. Reduction may create optimal flow. Dry mils thickness is 1.5-2.  Ferrous metal surfaces require primer before application.  When rolling product, recommend 1/4″ nap lint free roller for smooth surfaces Porous Surfaces Most porous surfaces should have a sealer or filler to adequately eliminate potential pinholes prior to applying RainguardPro® Polyurethane HD . For unpainted porous surfaces, use Micro-seal Water Repellent/Sealer prior to application of RainguardPro® Polyurethane HD Apply one coat of RainguardPro® Polyurethane HD (3-4 mils wet per coat) allowing 4 hours between coats or when coating is tack free (pressing thumb into surface and no thumbprint remains) Any runs should be brushed our rolled out immediately before drying When dry, thickness is 1.5 – 2 mils When rolling product, recommend 3/4″ nap lint free roller cover for porous and textured surfaces *For heavy duty applications such as warehouse floors with forklift traffic, total DFT thickness should be 3-4 mils (2 coats) RECOAT OR TOPCOATING: Multiple coats of this product are acceptable.  When recoating this product, it is advisable to apply the recoat before 24 hours passes. If the first coat has dried longer than 24-hours, abrade the surface to promote adhesion for the second coat. Refer to the cure schedule as a guideline to follow, in addition we strongly recommend to test the coating before recoating or topcoating. This is done by pressing your thumb on the coating in multiple places to ensure a fingerprint impression is not visible. If there is no impression visible, then coating the floor can be done. Note, colder or hotter than 75 degrees can affect the curing time schedule   CLEANUP: Clean up promptly with mild soap and water before product cures. Dispose of according to local, state and federal regulations. LIMITED WARRANTY: 10 Year Warranty – Apply 1 coat at 2 mils DFT .  Fill out warranty pre-application at RainguardPro.com PERSONAL PROTECTION: RainguardPro® Polyurethane HD is a zero-VOC coating. The volatile to evaporate will be water. No special clothing or respirators are required. Due to its total water-based formulation, the hazard of flammability is removed. LIMITATIONS RainguardPro® Polyurethane HD should be tested on all substrates before complete application Do not apply in humidity above 80% or rain Horizontal surfaces coated with RainguardPro® Polyurethane HD become slippery when wet recommend an anti-slip additive Should not be applied in high wind, rain or when the ambient teperature is below 5 °C (40 °F). Certain porous surfaces may require sealer or block filler to allow the RainguardPro® Polyurethane HD to create a more desirable aplpication and maintain the integrity of the surface.  Test patch should be applied before the final application Do NOT overapply.  More is NOT better.  A heavier application can cause micro blistering and affect the finish When using white color RainguardPro® Polyurethane HD over previously painted surface, test first to confirm it will provide the hide needed in a one or two coat application.  Lighter colors will be easier to cover in one coat. Physical properties are typical values and not specifications. CLEAR-SEAL 100% Urethane Super Premium Sealer | High Gloss From: $176.00 High Gloss Super Premium Sealer Hot Tire Pickup & UV Resistant Great For Driveways, Walkways, Decks, Wall Murals Water Base, Low VOC, Eco-Friendly Chemical and Spill Resistant Excellent Adhesion Anti-Slip Finish Available For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood Specified by Architects in 099123, 099723, 099313 Select options This product has multiple variants. The options may be chosen on the product page CLEAR-SEAL 100% Urethane Super Premium Sealer| Low Gloss From: $176.00 Low Gloss Super Premium Sealer Hot Tire Pickup & UV Resistant Great For Driveways, Walkways, Decks, Wall Murals Water Base, Low VOC, Eco-Friendly Chemical and Spill Resistant Excellent Adhesion Anti-Slip Finish Available For Concrete, Brick, Pavers, Stone, Unglazed Tile and Wood Specified by Architects in 099123, 099723, 099313 Select options This product has multiple variants. The options may be chosen on the product page E100 Urethane Primer Finish Coat | Aluminum Galvanized & Rusty Steel | Dry Heat to 400 °F | App... From: $55.00 Prime over Steel, metal, weathered galvanized steel, aluminum, fiberglass, polyurethane foam and previously painted surfaces Excellent “wetting out” properties and performance over sound rusty surfaces Outstanding abrasion & chemical resistance Very good weather resistance Excellent corrosion resistance, passed 1,200 hrs in salt cabinet Fast recoat 2-3 hours at 75°F & 50% R.H Cures down to 18°F and apply up to 140°F High heat resistance to 400°F dry Single component, easy to use Topcoat with most Epoxy, Urethane , Silicone Excellent barrier coat over lead based coatings USDA Approved Select options This product has multiple variants. The options may be chosen on the product page E101C Moisture Cured Urethane Clear Heavy Traffic Floor Sealer | Dustproofer | Prevents Spalling From: $85.00 Great heavy duty stain resistant floor sealer for warehouse and other heavy use areas Excellent adhesion and sealer for concrete, wood and masonry surfaces. Extremely hard, yet flexible film. Outstanding “wearing properties Highly resistant to abrasion and impact. Excellent stain resistance. Keeps concrete dusting down. Good chemical resistance. Easy to clean and maintain. Quick recoat as soon as 1-2 hours One component, easy to use - No mixing 1-2 hour POT Life. Select options This product has multiple variants. The options may be chosen on the product page E322HW High-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F From: $60.00 Outstanding durability with impact resistance of 160 in lb (Gardner Impact test) Cold temperature application down to 45°F Excellent abrasion resistance Only 22 mg loss (Tabor Abrasion test) Reduced to 10 mg loss using our High Wear 325 additive Excellent Chemical Resistance Aliphatic, UV Stable and will not yellow Easy to Use with Long 2-4 Hour Pot Life Great for both Indoor and Outdoor Concrete Floor Projects Comes in wide Variety of Clear and 18 Different Colors Solvent Based - Excellent adhesion Select options This product has multiple variants. The options may be chosen on the product page E322SG Semi-Gloss Aliphatic Urethane Abrasion & Chemical Resistant Low Temp 45°F From: $60.00 Outstanding durability with impact resistance of 160 in lb (Gardner Impact test) Cold temperature application down to 45°F Excellent abrasion resistance Only 24 mg loss (Tabor Abrasion test) Reduced to 12 mg loss using our High Wear 325 additive Excellent Chemical Resistance Aliphatic, UV Stable and will not yellow Easy to Use with Long 2-4 Hour Pot Life Great for both Indoor and Outdoor Concrete Floor Projects Comes in wide Variety of Clear and 18 Different Colors Solvent Based - Excellent adhesion Select options This product has multiple variants. The options may be chosen on the product page E332 Clear Antimicrobial Urethane | High Gloss | Resist Mold & Mildew | Stain & Chemical R... $220.00 Antimicrobial technology Excellent chemical resistance High Gloss Excellent Weather Resistance Highly resistance to abrasion and impact Extremely hard, yet flexible Resists mold and mildew Outstanding "wearing" properties Easy to Clean Topcoat for decorative floors, toppings and pigmented epoxy concrete coatings Select options This product has multiple variants. The options may be chosen on the product page E352P Hi-Gloss Polyester Polyurethane Floor Coating | Chemical Abrasion Resistant | Exterior Interio... From: $205.00 Great Interior & Exterior Horizontal Concrete & Steel Protection Exceptional Exterior Durability Excellent weather resistance Non-chalking and non-yellowing with excellent gloss and color retention Extremely tough, yet flexible A tile-like finish. Easy to clean Excellent chemical and stain resistance Highly resistant to abrasion and impact Outstanding wearing properties Handles up to 250°F Dry Service Long 4 hour POT life @ 75ºF Available in clear and 11 colors Select options This product has multiple variants. The options may be chosen on the product page E356HG High Gloss Urethane Moisture Cured | Exceptional Abrasion & Chemical Resistance | UV Sta... From: $70.00 Superior abrasion resistance Only 4.4 mg loss (Tabor Abrasion test) Outstanding Chemical Resistance Excellent durability with impact resistance of 100 in lb (Gardner Impact test) Aliphatic, UV Stable and will not yellow Easy to Use one part with Long 3-5 Hour Pot Life Great for both Indoor and Outdoor Concrete Floor Projects Solvent Based With Excellent adhesion Select options This product has multiple variants. The options may be chosen on the product page E374 Clear Satin Polyurethane | Non-Yellowing | For Vertical Concrete and Steel | Walls $125.00 Great Interior & Exterior Vertical Concrete & Steel Protection and as topcoat for light to medium duty foot traffic only applications Exceptional Exterior Durability High solids Tile-like finish. Easy to clean Good chemical and stain resistance Highly resistant to abrasion and impact. Excellent gloss and color retention to UV exposure Pass 2500 hrs - QUV Accelerated Weathering ASTM D4587 Outstanding wearing properties. Non-chalking and non-yellowing High film build Handles up to 300°F Dry Service Long 4-6 hour POT life @ 75ºF Available in clear and 21 colors CALIFORNIA CUSTOMERS, PLEASE ORDER VOC COMPLIANT E375P POLYURETHANE Select options This product has multiple variants. The options may be chosen on the product page E5030CL Urethane Clear Sealer / Topcoat WB From: $60.00 Attractive, clear aliphatic non yellowing finish Versatile product good on concrete and masonry surfaces Recoat only 1-2 hours & light foot traffic 2-4 hours Extended 24 hour pot life Excellent abrasion resistance (Taber Abrasor test only 10 mg loss) High Gloss (>80 at 60 degrees) Flexible (120% Elongation at break) Water based Select options This product has multiple variants. The options may be chosen on the product page E5520 Low Gloss Urethane Water Base Abrasion & Chemical Resistant From: $64.00 Outstanding durability with impact resistance of 160 in lb (Gardner Impact test) Excellent abrasion resistance Only 23 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive Excellent Chemical Resistance Aliphatic, UV Stable and will not yellow Great for Indoor Concrete Floor Projects Very Low voc 35 g/L, water based formula Select options This product has multiple variants. The options may be chosen on the product page E5521 High Gloss Urethane Water Base | Abrasion & Chemical Resistant | Low Odor | Vapor Permeab... From: $50.00 Outstanding durability with impact resistance of 120 in lb (Gardner Impact test) Excellent abrasion resistance Only 21 mg loss (Tabor Abrasion test) Reduced to as low as 10 mg loss using our High Wear 325 additive Excellent Chemical Resistance Aliphatic, UV Stable and will not yellow Great for Indoor Concrete Floor Projects Low odor, water based formula Vapor Permeable Topcoat Select options This product has multiple variants. The options may be chosen on the product page H20 zioTHANE Low Gloss Urethane Concrete Floor Sealer / Topcoat From: $89.00 Tough, Durable Concrete Floor Sealer Topcoat for Epoxy Floor Coatings Excellent Chemical and Abrasion Resistance Exceptional Impact Resistance Aliphatic, UV Stable and Will Not Yellow Beautiful Clear, Low Gloss Appearance Designed for High Traffic and Industrial Areas Water Based, Low voc <10 g/L Select options This product has multiple variants. The options may be chosen on the product page H20 ZioTHANE Semi-Gloss Urethane Concrete Floor Sealer/Topcoat From: $89.00 Tough, Durable Concrete Floor Sealer Topcoat for Epoxy Floor Coatings Excellent Chemical and Abrasion Resistance Exceptional Impact Resistance Aliphatic, UV Stable and Will Not Yellow Beautiful Clear, Semi Gloss Appearance Designed for High Traffic and Industrial Areas Water Based, Low voc <10 g/L Select options This product has multiple variants. The options may be chosen on the product page Polyurethane HD IsoFree Aliphatic 2K Floor Coating | High Gloss Satin Matte Flat | Low Temp 40 °F | ... From: $68.00 UV Resistant Will Not Yellow Zero VOC- SCAQMD Compliant Choice of High Gloss, Satin, Matte or Super Matte (nearly flat) Finish Clear & White Color Excellent Adhesion Outstanding Chemical Resistance MEK Double rub @50% solids Passed 2,000 Cycles Test For Concrete, Brick, Wood, Metal, Tile (glazed & unglazed) Select options This product has multiple variants. The options may be chosen on the product page Sale Whiteboard Paint Dry Erase Water Based Polyurethane Coating From: $65.00 Turns almost any surface into a Dry Erase Whiteboard Comes in Clear or White Color Write on it only 72 hours after application Tough, Durable, Long Lasting Dry Erase Surface Scratch Resistant Great Chemical and acid resistance MEK Double rub @50% solids Passed 2,000 Cycles Test Non-yellowing & UV resistant topcoat Odor Free and Zero VOC's Water Based and Non-Flammable Select options This product has multiple variants. The options may be chosen on the product page