Bio-Flor E182 Acid Resistant Floor Epoxy | Fast Cure | Self Leveling | 100% Solids | Air Shippable

OverviewColor OptionsSpecificationsCoverage RateCure TimeApplicationMore OptionsProjects Bio-Flor E182 Acid Resistant Floor Epoxy | Fast Cure | Self Leveling | 100% Solids | Air Shippable Bio-Flor E182 is a solvent free, highly adhesive flooring system designed for application over surfaces such as existing vinyl tiles and concrete. Finished thickness is typically 30-40 mils which provides excellent wearability in a variety of colors and textures. The Bio-Flor E182 is self-leveling and provides high durability for foot and vehicular traffic.  It has been used extensively for large warehouse floors and distribution centers. Being solvent free, Bio-Flor E182 can be installed without disrupting nearby operations or requiring ventilation systems resulting in minimum downtime. Bio-Flor E182 is used as a heavy-duty floor coating for warehouses, walkways, etc. The Bio-Flor E182 comes in 1 gallon and 2 gallon kits and available in 10 colors with an extended 2 year shelf life.  It is non-hazardous and available for lower cost air shipping for quick delivery as needed. Where is Bio-Flor E182 typically used? Warehouse Factory Manufacturing Facilities Walkways Lumber Plants Generator Rooms Breweries Commercial Locations Distribution Centers Why Bio-Flor E182? Loading Docks: Generally used with aluminum oxide abrasive for maximum durability and traction. Reduces or eliminates sweating following sudden changes in weather from cold to hot and humid. Vinyl Asbestos Tile: Encapsulates after preparation by OSHA approved scrubbing. Seals and creates a tough, seamless flooring in any color. High Gloss 100% Solids   SPECIFICATIONS  Vehicle Type Epoxy/ Aliphatic Polyamines Pigmentation Colored/ Inert / Kevlar Fiber reinforced  Mixed Density 1.2 g/ml3- based on color Colors Standard Colors – Black, White, Grey, Etc. Finish/ Gloss High Gloss Flash Point >200F Solids by Volume 100% VOC Free Thinner Not Needed Cleaner MEK or Lacquer Thinner Pot Life 15 minutes at 77F Mixing Ratio by Volume 2:1 – premeasured in packaging Induction Time Not needed Application Method Brush, Roller, Squeegee Recommended Application Thickness 15 mils per coat Spreading Rate/ Gal 105-125 sq ft/ gallon @ 12-15 mils Dry Time, Dust Free 8 hours @ 77F Dry Time, Service 12-24 hours @ 77F Maximum Overcoat Window 72 hours @ 77F Application Temperature 45-110F Storage Conditions 24 months Sealed, stored in protected environment avoiding direct sunlight exposure Recommend Application Thickness is 6 mils on flat surface. Coverage is 105-125 sq ft / gallon @ 12-15 mils CURE SCHEDULE Pot Life 15 minutes at 77F Recoat 2-4 hours @ 77F Foot Traffic Back in-Service 12 hours @ 77F Heavy Traffic Back in-Service 24 hours @ 77F Maximum Overcoat Window 72 hours @ 77F APPLICATION TEMPERATURE: 45- 110 degrees F Product Use Instructions  SURFACE PREPARATION  NEW CONCRETE: Leave to cure properly for a minimum of 20 days before coating. Weak surface laitance must be removed, preferably by either; acid etching or abrasive blasting. (Note: acid etching can be difficult and unreliable unless performed with particular attention to proper acid application, scrubbing, rinsing, and drying). Abrasive blasting (recommended), may be effected by conventional open blasting or with “Blastrac” type centrifugal equipment. The concrete surface after preparation should have the granular appearance of medium sandpaper. AGED CONCRETE: Best prepared by abrasive blasting. If contaminated contact us for advice. VINYL ASBESTOS/VINYL COMPOSITION TILE: Prepare for coating by scrubbing with wax stripper using a janitorial scrubber. (Note: when stripping vinyl asbestos tile, (VAT), use no more aggressive pad than a green pad in accordance with OSHA directives -under no circumstances abrade the tile surface). Check the pH of the surface using pH test paper- rinse until pH is in the range 6-8.5. Vacuum, squeegee or blow-dry the surface before coating application. ASPHALT PLANKING WITH ASBESTOS: These surfaces are best prepared by janitorial stripping twice. Follow the procedure described above for VAT stripping as completely as possible then repeat the process before rinsing and checking pH using pH test paper to ensure pH is in the range 6-8.5. Dry the surface before Bio-Flor E182 application.   MIXING PROCEDURES  This material is a two-component product, premeasured to produce the desired kit size once part A and B are mixed. For small kits, a Jiffy type mixer with a high torque motor is recommended for proper blending. Pour the curing agent into the base and mix for about 1 minute, taking care to reach all corners and walls to eliminate unmixed material. Unmixed material will never harden. Material may immediately be used. APPLICATION  PRIMER, OR BASE COAT: is applied at a spreading rate of 120 sq ft/ gal (concrete) to 125 sq ft/ gal (Vinyl Tile) to yield a wet film of approximately 13 mils. Application is made by pouring a mixed kit over the area then, spreading using long handled squeegees, followed by final back-rolling. The formulation is self-leveling and will flow out to level most surface irregularities within a few minutes AGGREGATE: is applied at a rate of 0.3-0.5lbs/ sq ft either “chicken-feeding” by hand or by a mechanical aggregate spreader. The objects is to “over-seed” or to apply enough aggregate to completely saturate the wet coating film leaving unabsorbed grains on the surface. Aggregate is spread within minutes of the primer coating application while it is still uncured and quite liquid. Remove the excess aggregate by brushing with a stiff yard broom when the film has hardened sufficiently – this will be after about five hours at 77F. The surface exposed after brooming will be flat and uniform. GLAZE OR SEALER application is made following the same pour/ squeegee/ roll method used for the primer coat at a spreading rate of about 100 sq ft/ gallon. “stretching” the coverage to about 140 sq ft / gallon will result in a greater surface texture for enhanced skid resistance , conversely application of more glaze coat will result in a smoother film which may be desirable in some applications. CURING BEFORE SERVICE: allow 12 hours curing at 77F before initial service, which includes rolling, but not spinning , wheeled traffic. Unlimited service is possible after about 24 hours at 77F with “full cure” occuring about 3 days after the last coating application. Safety: This is a hazardous material if misused. Read and understand the Safety Data Sheets (SDS’s) before use Warranty Disclaimer: The technical data given herein has been compiled for your help and guidance. It is based upon our experience and knowledge however, as we have no control over the use to which this information is put, no warranty, express or implied, is intended or given. We assume no responsibility whatsoever for coverage, performance, or damages, including injuries resulting from use of this information or products recommended herein. 10x Polyurea Interior Control Joint Filler | Quick Cure | Cold Temperature Apply Down To 0F From: $52.00 Quick Back in Service Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits High Shore Hardness for superior protection and support to joint edges Cold Application down to 0F Rapid curing Semi-Rigid polyurea Great for industrial floor Chemical Resistant Flexible in Cold Temperatures 100% Solids, No VOC Select options This product has multiple variants. The options may be chosen on the product page 3003 Polyurea Slow Set Interior Control Joint Filler | Low Temp -20°F From: $176.00 Offers load transfer across control joints for good protection of edges Back-in-Service "Drive-Over" in 30 to 60 minutes Longer working time than the 3004 Fast Set Polyurea 5-8 Minute Gel Time @ 77°F Meets USDA Requirements for incidental food contact Stays Flexible In Extreme Cold Cold Applications down to -20°F (-29°C) Not Sensitive To Moisture Self-leveling High Impact Resistance Excellent Abrasion Resistance Chemical Resistant Apply using dual component pump, 300 ml x 300 ml cartridge kit or hand application (small projects) 100% Solids, No VOC, No Odor Select options This product has multiple variants. The options may be chosen on the product page 3004 Polyurea Fast Set Interior Control Joint Filler | Low Temp -20°F From: $176.00 Quick Back-in-Service "Drive-Over" in only 20-30 minutes Offers load transfer across control joints for good protection of edges Ideal for High Speed Application using Machine Dispensing System or for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge kits (total 21 oz or 600 ml per cartridge kit) Tack Free only 2-3 minutes Meets USDA Requirements for incidental food contact Stays Flexible In Extreme Cold with 300% Elongation Cold Applications down to -20°F (-29°C) Not Sensitive To Moisture Non-Flammable Self-leveling High Impact Resistance Excellent Abrasion Resistance Chemical Resistant 100% Solids, No VOC, No Odor Select options This product has multiple variants. The options may be chosen on the product page 3246 Polyurea Flexible Expansion Joint Filler | Quick Cure | Exterior Interior | Low Temp -20°F | El... From: $99.99 Quick 30 Min Back In-Service Joint Repair Extremely Flexible 600% Elongation for extreme conditions Abrasion, Chemical and Fuel Resistant Great for Concrete Driveways, Parking Garages, Bridges, Warehouses Outdoor control joint & all expansion joints 100% Solids, Self leveling Apply using High Speed Machine Application and for small projects easy application using twin cartridge kits and 300 ml x 300 ml cartridge gun Cold Application Down to -20°F (-26°C) ***2-3 WEEK LEAD TIME BEFORE SHIPPING.  PLEASE CALL 630.675.4509 FOR SPECIFICS**** Select options This product has multiple variants. The options may be chosen on the product page 6007 Wet Condition Epoxy For Concrete & Steel | Low Temp 35°F | 100% Solids From: $543.00 Protect Problem Wet and Damp Areas Withstands to 15-18 PSI Hydraulic Vapor Pressure Cold temperature down to 35°F Designed to Protect both Concrete and Steel Use as Primer With Topcoat or Floor Coating Offers Excelllent Moisture and Corrosive Protection with  Outstanding Adhesion 100% Solids, no VOC, 2 Component Select options This product has multiple variants. The options may be chosen on the product page Bio-Chime E390 Joint Sealant & Flexible Coating | Expansion Joints | Apply to 2″ Thick | ... From: $80.00 Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications Select options This product has multiple variants. The options may be chosen on the product page Bio-Dur E561 Epoxy Coating for Above Or Below Water Application | Heavy Duty | High Build 40-60 mils... From: $75.00 Advanced Protection: Safeguard surfaces against water and oil with hydrophobic and oleophobic properties. Easy Application: Apply effortlessly using a brush, roller, airless sprayer, or pump sprayer. Fast Drying: Achieve quick results with a fast drying time. Invisible Finish: Maintain the natural appearance of surfaces without altering their friction or slip resistance. Environmentally Friendly: Water-based formula with no solvents or VOCs, ensuring no unpleasant odors. Longevity: Enjoy up to 10 years of protection under suitable conditions. Versatile Use: Ideal for a variety of mineral substrates, ensuring vapor permeability without compromising surface integrity. Select options This product has multiple variants. The options may be chosen on the product page Bio-Fill E457 Epoxy Repair | Void Filler to 1″ | Chemical Resistant | Horizonal ,Vertical and ... From: $190.00 Civil Structures: Replacing concrete lost by impact or abrasion in power generation, transportation and port facilities Chemical Exposure: Restoration and protection of concrete exposed to chemical attack in sumps, secondary containment and similar areas 100% Solids VOC Free Strong yet lightweight filler Horizontal, Vertical and Overhead Applications Can be applied underwater Select options This product has multiple variants. The options may be chosen on the product page Bio-Flor E183 High Temperature Resistant Floor Epoxy | Fast Cure | Self Leveling | 100% Solids | Air... From: $80.00 Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications High Gloss 100% Solids Self-Leveling Select options This product has multiple variants. The options may be chosen on the product page Bio-Seal E907 Resin | High Heat Tolerance | Quick Return to Service From: $100.00 Tank Chime Area: Create a permanently flexible corrosion resistant seal on chime surfaces of storage tanks and similar structures Expansion Joints: Use in situations where other joint compounds would soften or fail by solvent or chemical attack. High resistance to weathering and UV exposure Flexible Coating: High flexibility without tearing allows for a durable, chip resistant coating for general applications Select options This product has multiple variants. The options may be chosen on the product page Dripless DC600 Dual Component Joint Filler Cartridge Gun 300ML x 300ML | Epoxy Polyurea $85.00 Dual-Component twin cartridge gun Each cartridge holds either 11 oz /300 ml or 5.5 oz / 150 ml of product Handles both 1:1 (300 ml x 300 ml) or 2:1 (300 ml x 150 ml) mix ratio tube configuration Quickly Apply Polyurea, Epoxy, Urethane Products Easy Application Of our Polyurea repair products: 3246, 3004, 800, 830 and the Epoxy/Urethane E443 Thrust Ratio 26:1 For Very High Viscosity Materials Each Pull Of Trigger Advances Cartridges By 3.5 mm Dual Steel Gripper Plates And Steel Push Disc Provide Durability Select options This product has multiple variants. The options may be chosen on the product page E100V Vertical Wall High Build Epoxy Coating | Underwater Concrete | Pools | 13 Colors From: $50.00 No sagging on vertical walls to 12 mils per coat Works well on underwater concrete decorative surfaces Great for pools and water features Good chemical and abrasion resistance Long 45 - 90 min pot life Outstanding adhesion 475 psi @elcometer Comes in 5 color options 100% solids, very low voc Select options This product has multiple variants. The options may be chosen on the product page E139FL Flexible Epoxy Primer & Floor Coating | 60% Elongation | 100% Solids | Indoor & Out... From: $65.00 Exceptionally flexible epoxy with 60% elongation High Build up to 50 mils thick per coat 100% Solids Commercial Epoxy Excellent Adhesion 450 psi Tough Abrasion resistant Only 6 mg loss (Tabor test) and 160 inch lbs Gardner variable impact test For use with broadcast systems and as flexible membrane primer Wide Variety of 15 Colors Select options This product has multiple variants. The options may be chosen on the product page E155CL Damp Condition Clear Epoxy Primer | Moisture Tolerant | Quick Cure | Low Temp 45° | Flexible From: $60.00 May be Applied to Damp or Moist Concrete Surfaces Excellent as a tough, flexible and clear concrete primer and sealer When used as clear Concrete Sealer has very low permeability to keep water and chemicals out while reducing concrete dusting, spalling and deterioration Excellent Adhesion to Concrete Excellent Primer for use with high performance coating systems As Quick as 30 min Recoat Time for 100% Solids Epoxy Systems Significantly Reduces Chance of Concrete Outgassing Problems Easy concrete preparation with either acid etching or concrete diamond grinding Select options This product has multiple variants. The options may be chosen on the product page E5829 Flexible Epoxy Urethane Interior Expansion and Control Joint Sealant From: $160.00 Flexible interior joint filler - Elongation 50.4% at 70F (ASTM D-412) Good for both expansion and control joints Great for general industry applications Hybrid epoxy urethane 2 component formula 100% solids with 0 voc Long 30-40 minute working time Low odor Paintable surface Select options This product has multiple variants. The options may be chosen on the product page E5829V Vertical Interior Wall Expansion & Flexible Joint Sealant From: $162.00 Flexible vertical interior joint filler - Elongation 67% at 70F (ASTM D-412) No sag formula for vertical interior wall and overhead applications Hybrid urethane epoxy 2 component formula 100% solids with 0 voc Low odor Paintable surface Select options This product has multiple variants. The options may be chosen on the product page E5830 Flexible Interior Expansion & Control Joint Sealant | Fast Set | Cartridge Applied From: $60.00 Flexible interior joint filler and sealant- Elongation 100% Easy Dual Cartridge Applied System Quick setting with light foot traffic in as little as 1 hour Excellent abrasion resistance 100% solids with 0 voc Low odor Paintable surface Select options This product has multiple variants. The options may be chosen on the product page E591 / E590 Wet Surface Epoxy | Apply Underwater | Cures to 35°F | Concrete – Steel | Floors &... From: $120.00 May be applied on wet or under water surfaces Cold temperature application down to 35°F Self-priming on steel and on most concrete applications Ideal for marginally prepared and painted surfaces Outstanding impact and abrasion High film build - Up to 20 mil DFT per coat on horizontal surfaces Vertical surfaces to 12 mils Excellent coating for manholes 100% solids and 0 g/L VOC's 3 Colors Available Select options This product has multiple variants. The options may be chosen on the product page E621 Flexible Control Joint Filler | 100% Solids | Up to 100% Elongation | Self-Leveling $335.00 Up to 100% Elongation Good resistance to steel wheel traffic Very resilient and tough Outstanding water tight bond to concrete Helps to prevent erosion of control joint edges Self leveling Easy to work with, cold applied, no special equipment needed Excellent adhesion to concrete USDA approved No VOCs Select options This product has multiple variants. The options may be chosen on the product page HyperBOND Epoxy | Wet Condition Moisture Tolerant | Concrete Floor Coating | Low Temp 40F | 100% Sol... From: $60.00 Tough, Durable Epoxy Coating Outstanding Bonding Water Insensitive and Can Be Applied In Wet Conditions Withstands up to 9 lbs. of hydrostatic pressure Cold temperature application down to 40F Long 30-35 min working time Resistant to Blushing/Sweating Good chemical, impact and abrasion resistance High solids 100% Available in clear & 12 colors! (Pigment sold separately).  In 3 gallon kits only, available pre-colored in 3 colors Select options This product has multiple variants. The options may be chosen on the product page HyperCURE Concrete and Wood Repair Kit | Flexible 100% Elongation | Quick Cure | Easy To Apply | Rec... $165.00 HyperCURE is designed for repairing concrete cracks, joints, spalls and damaged areas before installing coating. Cures quickly allowing coating installation same day Superior Flexibility 100% Elongation Outstanding Bonding Fast Cure - 15 to 30 min recoat Rapid Cure Rate For Same Day System Application High D70 Hardness High Tensile & Tear Strength Very Easy to Use Tough, Durable Epoxy Concrete and Wood Crack Repair, Hole, Spall and Control Joint Filler Select options This product has multiple variants. The options may be chosen on the product page Hot Mend-Con RTU Concrete Repair | Wet Conditions & Underwater | Vertical No Sag | Quick Cure | Pai... $470.00 Repair in Wet conditions - Apply Underwater Great for Pool Repairs High strength epoxy Bonds to fresh or hardened concrete, stucco, wood, metal No Sag No Drip Formula - perfect for Vertical, Overhead or Horizontal surfaces Quick Cure Dries to touch 15 minutes, paint in 1 hour and drive on it in 8 hours (temperature dependent) 2x as strong as most concrete - Compressive strength 8000 psi Easy To Apply – Convenient ready-to-use cartridge system Wide application temperature 40°F – 100°F Paintable surface Comes in Case of 12 Cartridges & Cartridge Gun Select options This product has multiple variants. The options may be chosen on the product page Newborn 435-XSP Dual Component Cartridge Gun 300ml x 300ml | 300 ml x 150 ml $120.00 Dual-Component Gun 10.5 oz/300ml Cartridge in 1:1 and 2:1 Ratio 300 ml x 150 ml Easily Converts to 300ml x 150ml cartridges Quickly Apply Polyurea, Epoxy, Urethane Products Easy Application Of Our Twin Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830 Thrust Ratio 26:1 For Very High Viscosity Materials Two-piece stamped steel friction plate Heat treated piston rod for increased durability Pressure release thumb plate offers easier pressure release Horizontal cartridge loading Select options This product has multiple variants. The options may be chosen on the product page Newborn 515-SP Vertical Dual Component Applicator Cartridge Gun $150.00 Use in Vertical Projects Quickly Apply Polyurea, Epoxy, Urethane Products Easy Application Easy thrust using push rod Snap in and out disks for quick change outs Cutter attachment that cuts spout of caulk tubes Vertical cartridge loading Select options This product has multiple variants. The options may be chosen on the product page Newborn 535-XSP Professional Dual Component Cartridge Gun 300ml, 150ml, 75ml $140.00 Dual-Component Gun 10 oz/300ml Cartridge 1:1 ratio Multi-Ratio Easily Converts with Snap In/Snap Out Push Disks for 300ml, 150ml 75 ml cartridges Quickly Apply Polyurea, Epoxy, Urethane Products Easy Application Of Our Twin Cartridge Polyurea's 3246, 3004, 4034, 830 Thrust Ratio 26:1 For Very High Viscosity Materials Extra Durable Teat Treated Piston Rod Precision Sintered Friction Plate Patented Stabilizing Plate for Extra Cartridge Support Easy Release Start Burst Reverse Gripping Plate Hammered Finished Alloy Handle With Comfort Grip Select options This product has multiple variants. The options may be chosen on the product page Newborn 830A30 Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml $420.00 Dual-Component Pneumatic Gun 10 oz/300ml Cartridges 1:1 ratio 2.5" Cylinder Generates 490 lbs Nominal Thrust @100 psi Quick application with smooth, even product flow Multi-Ratio Convert to 300ml 150ml 75ml cartridges using snap-in disks Quickly Apply Polyurea, Epoxy, Urethane Products Easy Application Of Our Twin 10.5 oz/300 ml Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830 Patented stabilizing plate securely holds cartridges Adjustable heavy duty aluminum air regulator Air dump valve stops flow instantly Reverse air Quick disconnect nipple Select options This product has multiple variants. The options may be chosen on the product page Newborn 850A30 HD Pnuematic Dual Component Cartridge Gun 300ml, 150ml, 75ml $690.00 Dual-Component Pneumatic Gun 10.5 oz/300ml Cartridges 1:1 ratio Powerful 4" cylinder generates 1,100 lbs nominal thrush @100 psi Quick application with smooth, even product flow Multi-Ratio Converts to 300ml 150ml 75ml cartridges using snap-in disks Quickly Apply Polyurea, Epoxy, Urethane Products Easy Application Of Our Twin 10.5 oz/300 ml Cartridge Joint Fillers 3246, 3004, 4034, 830, E5830 Patented stabilizing plate securely holds cartridges Adjustable heavy duty aluminum air regulator Air dump valve stops flow instantly Reverse air Quick disconnect nipple Select options This product has multiple variants. The options may be chosen on the product page P3 Marine | Saltwater, Fresh Water & Chloride Concrete Protection | Waterproofs | Permanent Sal... $700.00 Exceptional Marine Saltwater and Winter Road Salt Chloride Concrete Waterproof Protection Great for Marine and Inland Waterway concrete infrastructure, docks, ramps, bridges, roads Easy Spray Apply Low Tide and Wet Concrete Horizontal & Vertical Increased Concrete Durability and Life with 1x Permanent Application Using Silica Nano-Technology Reduces Depth of Penetration of Water Under Pressure 90% EN 12390-8 Improved resistance to Chloride Penetration For Long Term Durability 26% NT-492 (new alt to ASTM C1202) Withstands Min 75lbs Hydrostatic Vapor Pressure Resistance to Concrete Freeze / Thaw damage increased 48% ASTM C666 Excellent Protection Against Salt Corrosion, Improved 51% ASTM C1556 Deep Penetration to 3″ Protects from Inside Out For Exceptional Results Improved abrasion resistance 58% ASTM C1803 Superior new concrete cure eliminates need for membrane, allows foot traffic 1 to 3 hours Zero VOC 15 Year Performance Warranty Available Select options This product has multiple variants. The options may be chosen on the product page UW601 Underwater Concrete Crack Filler Epoxy Paste Repair $350.00 Make Repairs Underwater or on Wet Surfaces Concrete and Masonry Both Horizontal & Vertical Repairs Good for Cracks up to 1/8" and Thin Build Repairs Apply 35F - 90F 100% solids with 0 voc Low odor ****SPECIAL ORDER ONLY - MIN ORDER QTY 60 GALLONS REQUIRED**** Select options This product has multiple variants. The options may be chosen on the product page UW602 Underwater Pourable Concrete Crack Filler Epoxy Repair $325.00 Make Repairs Underwater or on Wet Surfaces Concrete, Cement and Masonry Both Horizontal & Vertical Repairs Good for Larger Cracks and Wide Variety of Repairs Easy to Use Pourable Formula 100% solids with 0 voc Low odor ****SPECIAL ORDER ONLY - MIN ORDER QTY 60 GALLONS REQUIRED**** Select options This product has multiple variants. The options may be chosen on the product page Check out customer projects using the Bio-Flor E182! Bio-Flor E182 Upgrades Generator Room Floor Coating Industrial Warehouse Floor Coating with Bio-Seal E199 and Bio-Flor E182 Black Haze Gray Light Gray White Safety Red Orange Safety Yellow Green Blue Red